The big big brother of the Combi 250VA, the Combi 250/1500 VA was developed to address the need for extreme accuracy cutting the new ultra long tile format and the new thin slab market where large pieces must be trimmed to fit.
PLEASE READ UPDATED FREIGHT POLICY BEFORE ORDERING AS ADDITIONAL SHIPPING CHARGES MAY APPLY
This saw qualifies for a $450.00 freight credit. An additional payment up to $350.00 may be required for shipping and delivery after order placement. This will be assessed once a shipping cost estimate to the delivery address is obtained. We apologize for this change but the reasons are explained and can be read by clicking on our freight policy above.
Check out these features:
- Powerful 1.75 hp 110v 15amp motor turns the blade at 2800rpm
- Super long 57" cutting length extends to 60" with plunge cut
- Super light at 125lbs for a saw with this cutting length
- Accurate 45 degree miter cuts with tilting head and rail system
Comes with these accessories included in the price:
- High quality miter gauge
- Built in laser for accurate long piece cutting.
- Removable side table to increase width for large tile
- 10" CR continuous rim blade for tile, stone, and porcelain.
- Sturdy square steel built in folding stand with wheels.
Blade diameter | 10" |
Blade shaft diameter | 5/8" |
Maximum cutting length ( with plunge) | 57" (60") |
Maximum cutting depth | 3.75" |
Motor power rating | 1.75hp 110v 15amps |
Blade speed | 2800 rpm |
Weight (very light for the size) | 125lbs |
Water pan capacity | 13 gallons |
Water pump flow rate | 3 gallons per minute |
Noise level | 78 db(A) |
Operating dimensions |
L 76" / H 24" / W 25" |
Combi Saws | 200 | 250VA | 250/1000 | 250/1500 | 350/1200 |
Blade diameter | 8" | 10" | 10" | 10" | 14" |
Blade shaft diameter | 5/8" | 5/8" | 5/8" | 5/8" | 1" |
Max cutting length | 21" | 28" | 37" | 57" | 48" |
Max cutting length with plunge | 24" | 31" | 40" | 60" | 48" |
Max cutting depth | 2 3/4" | 3 3/4" | 3 3/4" | 3 3/4" | 4 3/4" |
Tilts to 45 degrees | Yes | Yes | Yes | Yes | Yes |
Motor HP | 1.75 | 1.75 | 1.75 | 1.75 | 4 |
Voltage | 110 | 110 | 110 | 110 | 220 1phase |
Amp Draw | 15 | 15 | 15 | 15 | 15 |
Weight | 48lbs | 75lbs | 82lbs | 125lbs | 265lbs |
[widgetic-faq-accordion id=59942035ecb2a1606c8b4567 autoscale=on width=800 height=600 resize=allow-scale-down]