- Description:
- Specifications
- IMER Mixer Comparison Chart
- Frequently Asked Questions
- Data Sheet - Manual - Mixing Guide
This model of the IMER MIX 360 is no longer available as of MAY 1 2023. Parts are still available however for this model 360.
A new IMER Model 360 is now available and in stock at the IMER Warehouse in Texas. The new model comes with a 220v Single Phase Motor or Gasoline Motor. It comes standard with a dust grate. This model changes was a decision by the IMER Factory in Italy.
The MIX 360 vertical shaft mixer is a towable machine designed to mix a variety of materials and do a variety of jobs. It's 9 cubic foot, 800lb, batch output can be for precast mixes with aggregate, dry pack mortar, or masonry stone mortar. IMER built and sold the first vertical shaft towable mixers in America 25 years ago using the principles of concrete batch plant design. Those design principles allow for the paddles to rotate thru the mix rather than lift and drop it as conventional mortar mixers do. This allows the 360 to mix very low slump materials like dry pack mortar and refractory mortar.
The top loading design with hinged grate and safety lock offer unparalleled jobsite and plant safety. The Mortarman 360 comes in either gas engine powered by Honda or Leeson electric motor options. The gearbox drive via dual belts and pulleys provide the power to the mixing paddles. Discharge is from a bottom gate which allows for a controlled flow.
Various cement producers around North America use the MIX 360 & 750 for mixing up test batches of their material as they know that the mix will be thoroughly blended. LaFarge Cement's Ductal product was sent out exclusively with MIX 360 mixers for roadway expansion joint repairs. Other road contractors have used the Mortarman series mixers for producing large batches of fast setting mixes for repairs where cars will drive over it in just a few hours.
MIX 360 | Vertical Shaft Mixer |
Drum capacity | 12 cubic feet |
Batch output | 9 cubic feet (est 800lbs ) |
Gas motor w/ centrifugal clutch | 11hp Honda |
Electric motor 1 phase or 3 phase 220v | 5hp |
Drum diameter | 38" |
Maximum aggregate size | 3/8" minus |
Discharge outlet height | 30" |
Pneumatic tires | 18" |
Weight | 800lbs |
Dimensions L x H x W | 59" x 58" x 44" |
Shipping Pallet Dimensions L x H x W | 80" x 56' x 50" |
IMER MIXERS | MM | WMN | MM60 | MM120 | MM360 | MBP750 | WKM250 | WKM350 |
Type | Barrel | Barrel | Bucket |
Vertical Shaft |
Vertical Shaft |
Vertical Shaft |
Barrel | Barrel |
Power E/G/D |
E only | E/G | E only | E only | E/G | E/G | E/G | E/G/D |
Power 110v E |
1/2hp | 1/2hp | 1/2hp | 2hp | no | no | 1.5hp | 1.5hp |
Power 220v E |
No | No | No | No | 5hpSP |
5hp 1P 7hp 3p |
1.5hp | 1.5hp |
Power Gas | No | 3hp | No | No | 11hp | 13hp | 5.5-6hp | 5.5-6hp |
Power diesel | No | No | No | No | No | No | No | 6hp |
Drum Size | 5CF | 5CF | 14gal | 4.25CF | 12CF | 27CF | 9CF | 12CF |
Batch output CF | 2.5CF | 2CF | 12gal | 3 CF | 9CF | 17CF | 6CF | 9.5CF |
Batch output lbs | 275 | 200 | 50 | 200 | 800 | 1700 | 400 | 600 |
Weight lbs | 120 |
101E 115G |
64 | 286 | 800 | 1700 | 525 | 650 |
Towable | No | No | No | No | Yes | Yes | Yes | Yes |
Removable Drum | Yes | Yes | Yes | No | No | No | Yes | Yes |
Poly Drum | No | Yes | Yes | No | No | No | No | No |
[widgetic-faq-accordion id=59b1986eecb2a1812d8b4568 autoscale=on width=800 height=600 resize=allow-scale-down]